Where Partitions IMEI of Asus Zenphone 4? How Backup it ?

as you know IMEI are important, if you devices lose IMEI it will be no Network.
in here we will be teach you how backup IMEI in Asus Zenfone 4.

 

IMEI Zenphone 4 in mmcblk0p3 as Factory, but if you want save IMEI you must save config too.

you can backup use adb tool [Download Here]. Phone Must be rooted

• Open CMD where ADB tool Place
• type " adb devices " to make sure devices connected to devices, if in CMD show device not authorized  you must see to devices and make ADB grant to connect device .
•  type "adb shell"
• type "su" if icon change from $ to # phone have root access.
• type "cat proc/partitions to know partitions of eMMC .

"dd if=/yourMountingPoint of=/yourDestination/partitionType"
/dev/block/ in mmounting point and add block of eMMC

"dd if=/dev/block/mmcblk0p3 of=/sdcard/factory.img "
"dd if=/dev/block/mmcblk0p5 of=/sdcard/config.img "

if you don't know destination place try type "ls" to know list of directory.

you IMEI should be save.

Do you know to restore ? see This Post [Will Update Soon]

How to enter bootloader / Droid boot / Fastboot Zenfone 6

How to enter bootloader / Droid boot / Fastboot  Zenfone 6

• Turn Off devices 
• Push Volume up and power same time
• After Asus Logo appear Release Power 
• Wait 4s, Asus Zenfone 6 will be bootloader mode.

Thanks

Tool to flashing Smartphone [link will be update soon]

Tool to flashing Smartphone

• MTK 
• SP FLASH TOOL
• WISE LINK
• SPD
• RESEARCH DOWNLOAD
• INTEL ASUS
• ASUS FLASH TOOL
• QUALCOMM
• MIFLASH
•  QPST
• QcomDLoader 
•  Samsung Smartphone
• Odin
•  

If you have more tool please contact us, we will update to list/

How Solve PMT error no Space MTK bassed smartphone

How Solve PMT error no Space occurred internal memory has been corrupted, if you want solve this problems you must change eMMC or eMCP.

if you want change you must notice a few things.

• have skill to reball and replace eMMC
• know eMMC supported to you phone 
• have firmware original phone

Download New IPSW to solve error 53 iOS 9.2.1 build 13D20

You can download iOS 9.2.1 build 13D20 from the links below:

• iPhone 6s
• iPhone 6s Plus
• iPhone 6
• iPhone 6 Plus
• iPad Pro (GSM + Wi-Fi)
• iPad Pro (Wi-Fi)
• iPad Air 2 (GSM+Wi-Fi)
• iPad Air 2 (Wi-Fi)
• iPad mini 4 (GSM + Wi-Fi)
• iPad mini 4 (Wi-Fi)
• iPad mini 3 (China)
• iPad mini 3 (GSM + Wi-Fi)
• iPad mini 3 (Wi-Fi)

This IPSW solve error 53 during restore but not make fingerprint work properly.

Apple Allow to bypass Security check for fingerprint with error 53 new IPSW released

About error 53

 

After you try to update or restore your iOS device in iTunes on your Mac or PC, you might see error 53 in iTunes and "Connect to iTunes" on your device. Error 53 appears when a device fails a security test. This test was designed to check whether Touch ID works properly before the device leaves the factory, and wasn’t intended to affect customers.

For anyone who experienced error 53, Apple has released an update to iOS 9.2.1 to allow you to successfully restore your device using iTunes on your Mac or PC. Use the steps in this article to restore and recover your device. If you believe that you paid for an out-of-warranty device replacement based on an error 53 issue, contact Apple Support to ask about reimbursement.


Source :  https://support.apple.com/en-au/HT205628 

Link Download New IPSW 9.2.1 

Enter DFU Mode iPhone / iPad / iPod with simple step

Enter DFU Mode iPhone / iPad / iPod

DFU mode is Bootloader Mode in iDevices, you can force DFU with this step

• Make Sure iDevices have enough battery ar lest 50%.
• Make Sure Power And Home Button Work Properly .
• Press Power and Home Button Same Time 10s
• After 10s release power button and still hold home button 15
• Done your Phone Have  in Bootloader mode / DFU

Solution PMT changed for the rom, it must be downloaded for MTK Smartphone

PMT is Partition Manger Table use for repartition and scat for firmware, if you flash with flash tool and get error " PMT changed for the rom, it must be downloaded " I have 2 solution for it.

1. Use Firmware -> Update Button 

If you dont have backup for NVRAM / IMEI you must use this button, this button will be read NVRAM / IMEI or secure data from phone and write automatically to phone after write firmware success, but in other case this phone get bootloop cos different partition for secure data or firmware, try enter recovery and wipe manual, if phone same case try format button.

Use Format Button and Download Again 

This Option will be erase all data from phone include firmware and secure data IMEI, if you dont have backup imei you dont do it . After Click Format, Click Download Again. Power in try check IMEI with Dial Phone *#06#.

HOW Backup IMEI MTK FROM Bootloop phone Click here

How Solve invalid IMEI in MTK with Box Flasher.

How Solve invalid IMEI in MTK without Box Flasher

 

Link Will update soon

Repair IMEI Samsung GT-N7000 / Note 1 - Octoplus Box

 MV Flasher

Repair IMEI Samsung GT-N7000 / Note 1 - Octoplus Box

IMEI use to receive Network , if your IMEI are 0/0 or NULL / 0049xxx absolutely your IMEI fault and can't use Network.
For Repair IMEI you must have box / dongle in this case i use octoplus box.

Need for check before repair IMEI,

1.  Phone must use Factory Firmware , Download Here
2.  Baseband Phone Must be OK, How to Check Baseband For Samsung Click Here.
3.  Must be Rooted, For Root Click Here

 Step For Repair

1. Install Driver Samsung, Download Here, if you have driver installed skip this
2. Install Octoplus Box samsung, Download Here  or SKIP
3. Power on Phone And USB Debug must on , Click Here To Turn on Usb Debug
4. Open Octoplus Box samsung, Click Qualcomm and Select GT-N7000 on List.
5.  Click Repair And Click Read Info.


Platform: Samsung Android
Selected port: COM27
Selected model: GT-N7000
Detected phone model: GT-N7000
HW Version: XXXXXXXXXXXXXX
Phone IMEI: 628128-88-777120-3
Firmware compiled date: Mon Mar 11 17:14:01 KST 2013
PDA version: N7000DXLSE
CSC version: N7000OLBLSE
SW version: N7000DXLS8
Phone IMEI: 004999-01-064000-0
Phone SN: HQsan000000
Android version: 4.1.2 (JZO54K)





6. Fill IMEI like Back Case and Click IMEI A Fix wait until phone Restart


Platform: Samsung Android
Selected port: COM27
Selected model: GT-N7000
Detected phone model: GT-N7000
Firmware compiled date: Mon Mar 11 17:14:01 KST 2013
PDA version: N7000DXLSE
CSC version: N7000OLBLSE
SW version: N7000DXLS8
Phone IMEI: 004999010640000
Phone SN: 00000000000
Android version: 4.1.2 (JZO54K)
Checking Root:
Phone is Rooted.
Reading security backup, please wait...
Backup saved as C:\Program Files\Octoplus\Octoplus_Samsung
\BACKUP\Security-GT-N7000-Unknown19-02-2016_07-57-42-.asec file
Cheking security type...
Old security type is detected
Old IMEI: 004999-01-064000-0
New IMEI: 354646-46-756467-2
Repairing IMEI ... Executing exploit...
Exploit has been executed successfully
Phone will restart now. Please don't disconnect cable!
IMEI successfully repaired.
To finish the operation, please restart the phone via phone's menu.

7. Check IMEI , Dial *#06# , IMEI like you Fill .
8. Done

Link Will Update Soon

How Flash / Update Firmware / Recover From Brick / Bootloop Lenovo S880 with SP Flash Tool

MV Flasher
How Flash / Update Firmware  / Recover From Brick / Bootloop Lenovo S880 with SP Flash Tool


how get back factory firmware with sp flashtool for free. Download File & Tool Below

• SP Flash Tool - Download Here
• Firmware S880 ROW 108 - Download Here
• Driver MTK - How Install Driver Click Here

Step:

1. Extract 3 File You Have Download.
2. Open Flash Tool.exe.
3. Click Scatter Loading and browse to firmware S880 RAW 108 and chose MT6575_Android_scatter_emmc.
4. Check DA DL ALL With Check sum.
5. Click Download And Connect Phone With out Battery.
6. Wait until Green Circle appears 
7. Remove Phone From PC and Power on it.

You have done Update / Recovery your Phone.

* Please Be patient link will be update soon .